Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Audio Technica AT-ART1000 Moving Coil Cartridge

December 2, 2016 Audio Technica AT-ART1000

The Audio Technica AT-ART1000 is part of Audio Technca’s exclusive excellence program where only the very best of components are offered to deliver the highest listening experience possible.

Audio Technica AT-ART1000 key features:

  • Direct power system (The moving coil si placed directly above the stylus tip)
  • Special line contact diamond tip stylus and a solid boron cantilever
  • Non-magnetic core coil, a 20 μm diameter PCOCC wire wound eight turns to a diameter of 0.9 mm is used
  • Despite being a non-magnetic core type, an output voltage of 0.2 mV is obtained by placing a 3 ohms coil in the minuscule 0.6 mm gap of a powerful magnetic circuit
  • Titanium body
  • Polymer cover and aluminium housing
  • Cartridge rebuild service available

Cartridge Type = Direct Power System, non-magnetic core coil (MC) type

Frequency response = 15 to 30,000 Hz

Output voltage = 0.2 mV (1 kHz, 5 cm/sec.)

Channel separation = 30 dB (1 kHz)

Output balance = 0.5 dB (1 kHz)

Tracking force = due to the unique construction of the AT-ART1000, each individual cartridge is supplied with its own tracking force measurement to allow optimum setting, which is between a range of 2.0 to 2.5g

Coil impedance = 3 ohms (1 kHz)

DC resistance = 3 ohms

Load impedance = ≥ 30 ohms (when connected

Coil inductance = ≤ 1 μH (1 kHz)

Static compliance = 30×10-6cm/dyne

Dynamic compliance = 12×10-6cm/dyne (100Hz)

Stylus = Special line contact stylus

Cantilever = 0.26 mm (0.01”) diameter solid boron

Vertical tracking angle = 21°

Dimensions (H×W×D) = 17.3mm ×17.0mm ×25.5mm

Weight = 11 g

Comments are closed here.