Krix MX-20 real Cinema at Home!
This is a fantastic solution and alternative to a conventional theatre speaker system and will deliver an amazing immersive theatre experience!
Krix has utilised its extensive knowledge of designing, manufacturing and building commercial theatre speaker arrays across the planet into the exciting new MX range of home theatre speaker systems. This system comprises left, centre and right speakers plus two subwoofers. It is specifically designed to be placed behind an acoustically transparent projection screen just like what you experience when you go to a commercial cinema!
Krix MX-20 Information and Specifications:
Designed for dedicated home cinemas with an acoustically transparent screen, the MX-20 will deliver your favourite movie soundtracks with supreme definition and accuracy, right through the picture and into your seat.
- Behind screen cinema quality speakers
- Easy to install
- Krix Infinite Baffle Wall
LCR SPEAKER MODULES
Frequency Range
40Hz-20kHz in-room response
Power Handling
100 – 500 Watts RMS recommended amplifier power
Sensitivity
97dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure Type
Bass reflex, front vented
Low-Frequency Driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered Kapton former, with ventilated magnet assembly and copper shorting ring for low distortion
High-Frequency Driver
26mm (1”) doped fabric dome with large roll surround. Ferrofluid cooled. Coupled to a Krix designed 90 x 40 short-throw waveguide
Input Terminals
Gold plated spring terminals
Dimensions
1220mm high x 365mm wide x 295mm deep (2210mm wide including subwoofer modules)
SUBWOOFER MODULES
Frequency Range
25Hz-200Hz in-room response
Power Handling
200 – 1400 Watts RMS recommended amplifier power
Sensitivity
96dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Enclosure Type
Bass reflex, front vented
Low-Frequency Driver
Single 380mm (15”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly
Input Terminals
High-level gold plated spring terminals
Dimensions
1220mm high x 550mm wide x 295mm deep (2210mm wide including LCR modules)
SYSTEM RECOMMENDATIONS
Recommended Room Depth
4m – 7m
Min. Screen Size 16:9
100″ (2210mm x 1243mm)
Minimum Screen Size 21:9
120″ (2806mm x 1184mm)
Download PDF Spec Sheet HERE
Please note speaker system spacer boxes, subwoofer power amplifier and surround speakers available at an extra cost. Please contact us for further information.
Download PDF Install Guide HERE
