The Krix Scenix In-Wall speaker can be used for In-wall mount left, centre, right, surround, rear surround and Atmos applications to provide a complete “Timbre Matched” Immersive Sound speaker array. You can also use Scenix In-Wall for surround, surround back and Atmos applications when combined with an MX or Megaphonix front speaker array
Considering building an immersive sound cinema? Krix and Sydney Hi-Fi Castle Hill can make it happen!
Krix Scenix In-Wall Key Features:
Fitting within a standard 90mm wall cavity, the Scenix can be used as front speakers behind acoustically transparent screens or as surround speakers in a multi-channel setup.
- Compact design
- Dual 130mm drivers
- Fits inside 90mm wall cavity
Frequency Range
80Hz-40kHz in-room response
Power Handling
50-150 Watts RMS recommended amplifier power
Sensitivity
91dB for 2.83 volts at 1 metre
Impedance
6 Ohms
Configuration
2-way
Enclosure Type
Sealed
Dimensions
470mm high x 295mm wide x 97mm deep cabinet
535mm high x 360mm wide x 1.6mm thick faceplate
Low-Frequency Drivers
Fibre-reinforced polymer basket, 130mm (5¼”) doped paper cone driver, 25mm (1”) vented magnet voice coil wound on high-temperature aluminium former
High-Frequency Driver
26mm (1”) dual concentric diaphragm with waveguide centre plug for controlled directivity. Non-reflective dual-chambered magnet structure with a copper shorting ring to lower distortion
Crossover Point
2.1kHz
Input Terminals
Gold plated binding posts
Cut-out Dimensions
475mm high x 300mm wide recommended
Weight
10kg each
Download Spec Sheet PDF HERE