The Krix IW-50 in-wall speaker replaces the hugely popular “Symmetrix” and maintains the same fitting and performance standards that we have come to rely on for so many of our custom home cinemas and media rooms.
Krix IW-50 Information and Specifications:
The fully enclosed rear cabinet guarantees the best possible bass performance, independent of the shape or size of the wall cavity, and also minimises sound transference into adjoining rooms. The IW-50 will fit into a standard 70mm stud wall, allowing 10mm for gyprock depth. The stainless steel, single-piece trimless grille is rust-resistant and comes in a white finish that can be easily painted to match your wall colour.
- Exceptional concealed performance
- Fits inside a 70mm wall cavity
- Fully enclosed backbox
- Trimless magnetic grille
Frequency Range
55Hz-40kHz in-room response
Power Handling
20 – 140 Watts RMS recommended amplifier power
Sensitivity
89dB for 2.83 volts at 1 metre
Impedance
Nominally 6 Ohms (minimum 3.5 Ohms)
Configuration
D’Appolito, 2-way
Cut-out Dimensions
555mm x 170mm recommended
Dimensions
596mm high x 211mm wide x 79mm mounting depth
Low-Frequency Drivers
2 x nominal 100mm (4”) doped paper cones. 25mm (1”) voice coil wound on high-temperature Kapton former
High-Frequency Driver
26mm (1”) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Neodymium magnet
Input Terminals
Gold plated spring terminals
Enclosure Type
Bass reflex, front vented
Weight
4kg each
Download the Infosheet HERE
