$4,900.00 inc. GST
The ProAc Response DB3 has a similar cabinet size to the Response DB1 but there are structural and visual differences. The DB3 also employs a different bass driver with a special surround, dust cap and crossover which have been chosen for their exceptional performance at a more affordable price.
The Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port at the rear of the cabinet. The tweeter is our ProAc 1-inch soft dome as used in other Response Range designs. This 1-inch silk dome has a superbly flat response with electrostatic-type detail and sweetness.
With the DB3, ProAc has created a small speaker with better efficiency and a rich sound that defies its physical size.
Note:
Please specify the colour you wish to purchase in the comment section at checkout, we will confirm via email, please call for non-standard colours. Stands not included, Check out our range of Atacama stands HERE
ProAc Response DB3 Specifications:
Nominal Impedance
8 ohms
8 ohms
Recommended Amplifiers
20 to 100 watts
20 to 100 watts
Frequency Response
38Hz to 30kHz
38Hz to 30kHz
Sensitivity
88.5 db linear for 1 watt at 1 metre
88.5 db linear for 1 watt at 1 metre
Bass/Midrange
ProAc 127mm (5”) long-throw unit with Pagina Mica cone and transparent dust cap
Tweeter
ProAc 25mm (1”) silk dome with special coolant
Crossover
Finest components on dedicated circuit board with multistrand oxygen-free copper cable throughout. Split for optional bi-wiring/bi-amping.
Finest components on dedicated circuit board with multistrand oxygen-free copper cable throughout. Split for optional bi-wiring/bi-amping.
Dimensions
Height (Cabinet)
12.5”(320mm)
Width (Cabinet)
7.28” (182mm)
Depth (Cabinet)
10.4” (280mm)
Weight
each 8.8Kg (19.6lb)
Mode
Stand mounted
Stand mounted
Grille
Acoustically transparent crimplene
Acoustically transparent crimplene
Finish
