Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Parasound JC 2 Preamplifier with Home Cinema Bypass

$9,500.00 inc. GST

Category: Brand:

Description

  •  6 pairs unbalanced RCA line-level audio input jacks
  •  2 input pairs can be switched to XLR balanced connectors
  •  Independent balanced/unbalanced select for the L & R channel
  •  Each channel’s input is switched by its own gold-on-silver contact relay
  •  4 output jack pairs with specialized functions:
  •  1 Main output jack pair is balanced XLR, polarity is switched by remote
  •  1 Main output jack pair is unbalanced RCA, polarity is switched by remote
  •  1 output jack pair is unbalanced RCA, inverted polarity only
  •  1 output pair is unbalanced RCA, normal polarity, fixed level for recorders
  •  Dual-mono left & right channel circuit boards minimize crosstalk
  •  Hand-matched complementary FETs
  •  Direct DC servo-coupled, no capacitors in the signal path
  •  Premium 4-gang motor-driven analog master volume control
  •  Separate TKD brand analog gain controls for L & R channel
  •  3/8″ thick aluminum shielding around audio boards
  •  Shielding prevents noise from power supplies & control circuits
  •  Separate output jacks for simultaneous normal & non-inverting polarity
  •  Aluminum chassis rear panel
  •  Remote control polarity switching uses gold-on-silver contact relays
  •  Vampire brand 24k gold-plated RCA jacks
  •  Neutrik brand premium XLR connectors
  •  Canare brand internal wiring
  •  High capacity R-core audio power transformer & inductor
  •  Hyper-fast soft recovery audio bridge rectifiers diodes
  •  Independent power supply for controller, relay coils, triggers, LEDs
  •  Remote control handset controls all functions
  •  Discrete IR codes for remote control
  •  Four 12v trigger output jacks for power amp auto turn-on:
  •  Two 12v trigger jacks are switched by the remote handset
  •  Two 12v trigger jacks are live when the JC 2 is turned on
  •  Two-way RS-232 serial port connection
  •  Line level inputs only; no inputs for phono
  •  Audio mute is switched by independent L & R relays
  •  Rear panel IR repeater input & loop out jacks
  •  Premium detachable heavy gauge IEC AC cord
  •  2 6’ (2m) trigger wires included
  •  Remote handset also controls Parasound Halo T 3 Tuner
  •  3u Chassis, rack mountable with HRA3 (sold separately)

 

   Frequency Response
5 Hz – 100 kHz, +0/-3 dB

        Distortion
THD: < 0.003% at 100 Hz
THD: < 0.005% at 20 kHz
IM: < 0.003%

        S/N Ratio
> 116 dB, input shorted, IHF A-weighted
> 104 dB, input shorted, unweighted

        Crosstalk
> 100 dB at 10 kHz
> 90 dB at 20 kHz

        Gain
14 dB, maximum

        L, R Gain Control Range
– 10 dB

        Input Impedance
Unbalanced: 30k ohms
Balanced: 30k ohms per leg

        Output Impedance
Unbalanced: < 60 ohms
Balanced: < 60 ohms per leg

        Input Sensitivity
200 mV for 1 V output
Total Gain: 14 dB
Maximum Output: 8 V

        XLR Pin Identification
1 = Ground (Shield)
2 = Positive
3 = Negative (Return)

        AC Power Requirement
110 – 120 V or 220-240 V, 50 – 60 Hzs
(Set AC Voltage switch on rear panel)
25 watt standby; 30 watts when turned on

        Dimensions
Width: 17 1/4″ (437 mm)
Depth: 16″ (406 mm)
Height, with feet: 5 7/8″ (150 mm)
Height, without feet: 5 1/4″ (133 mm)

        Weight
Net: 24 lbs. (11 kg)
Shipping: 36 lbs. (16.4 kg)

        Rack Mount Accessory
HRA 3 (May be purchased separately)

Additional Information

Enquiry