Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Audio Technica AT-ART9XA Dual Moving Coil Cartridge

$2,299.00 inc. GST

SKU: AT-ART9XA Category: Brand:

Description

An update of the AT-ART7, the Audio Technica AT-ART9XA non-magnetic core MC cartridge features a Shibata stylus on a 0.28 mm diameter solid boron cantilever.

Audio Technica AT-ART9XA Information:

  •  Non-magnetic core moving coil cartridge offers superior spatial representation
  •  Dual moving coils are aligned in an inverted V shape, providing high separation and wide response for clear sound localization and minimal distortion
  •  Shibata stylus ensures accurate high and mid-low range reproduction, and the 0.28 mm diameter solid boron cantilever provides excellent response characteristics
  •  Neodymium magnet and permendur yoke significantly increase magnetic energy
  •  Redesigned coil armature provides an output voltage of 0.2 mV (1 kHz, 5 cm/sec)
  •  PCOCC coils ensure high-fidelity transmission
  •  Machined aluminium base supports both the magnetic circuit and the vibration system, ensuring excellent playback stability
  •  A hybrid body of machined aluminium and high-rigidity plastic reduces undesirable parasitic resonance
  •  Threaded cartridge mounting holes allow easy installation to a headshell or integrated tonearm

 

Specs:

Frequency Response 20-50,000 Hz
Channel Separation 30 (dB at 1 kHz)
Vertical Tracking Angle 20°
Stylus Construction Nude
Recommended Load Impedance Min. 100 ohms (when head amplifier connected)
Coil Impedance 12 ohms (1 kHz)
DC Resistance 12 ohms
Coil Inductance 2.5 µH (1 kHz)
Output Voltage 0.2 mV (1 kHz, 5 cm/sec.)
Output Channel Balance 0.5 dB (1 kHz)
Stylus Shape Shibata
Cantilever 0.28 mm diameter solid boron
Static Compliance 20 x 10-6 cm/dyne
Dynamic Compliance 10 x 10-6 cm/dyne (100 Hz)
Mounting Half-inch
Cartridge Weight 8.5 g (0.30 oz)
Dimensions 17.3 mm (0.68″) H × 16.8 mm (0.66″) W × 25.0 mm (0.98″) D
Accessories Included Non-magnetic screwdriver; 2 washers; cartridge installation screws (M2.6) (5.0 mm × 2, 8.0 mm × 2, 10.0 mm x 2, 12.0 mm x 2); protector; brush
Notes Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

Additional Information

Enquiry