Audio Technica AT-OC9XEB dual moving coil stereo cartridge with bonded Elliptical stylus. The OC9XEB includes threaded inserts in the cartridge body that enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required!
Specs
Type: Dual Moving Coil
Body Material: Aluminum
Frequency Response: 20-30,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output: 0.32 mV (at 1 kHz, 5 cm/sec)
Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: Elliptical bonded
Stylus Type: Bonded round shank
Stylus Curvature Radius: 0.3 x 0.7 mil
Cantilever: Aluminum pipe
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil: PCOCC
Terminal Pins: Brass
Mount: Half-inch
Weight: 7.6 g (0.3 oz)
Dimensions: 17.3 x 16.8 x 25.7
See the entire Audio Technica cartridge range HERE