Audio Technica AT-OC9XEN Moving Coil Cartridge

Description

Audio Technica AT-OC9XEB DUAL MOVING COIL CARTRIDGE & STYLUS. The OC9XEN coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion

Audio Technica AT-OC9XEN key Features:

• Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
• The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
• The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
• Features low mass nude elliptical stylus and aluminium cantilever
• A neodymium magnet and pure iron yoke provide increased magnetic energy
• Aluminium body minimizes unwanted vibration for reduced resonance and superior audio reproduction
• Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Specs

Type: Dual Moving Coil
Body Material: Aluminum
Frequency Response: 20-30,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output: 0.35 mV (at 1 kHz, 5 cm/sec)
Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: Elliptical nude
Stylus Type: Nude square shank
Stylus Curvature Radius: 0.3 x 0.7 mil
Cantilever: Aluminum pipe
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil: PCOCC
Terminal Pins: Brass
Mount: Half-inch
Weight: 7.6 g (0.3 oz)
Dimensions: 17.3 x 16.8 x 25.7

See the entire Audio Technica cartridge range HERE