Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Audio Technica AT-VM95E Dual Moving Magnet Cartridge

$79.95 inc. GST

SKU: AT-VM95E Category: Brand:

Description

The Audio Technica AT-VM95E Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

Audio Technica AT-VM95EN Features:

  •  VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  •  Aluminium cantilever
  •  Specially wound coils increase output voltage
  •  Durable low-resonance polymer housing
  •  Threaded inserts in cartridge body enable the cartridge to be mounted to headshell with just two screws – no nuts required
  •  Compatible with any AT-VMN95 replacement stylus

Specifications:

Frequency Response 20-22,000 Hz
Channel Separation 20 (dB at 1 kHz)
Vertical Tracking Force 1.8-2.2g (2.0g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance 47,000 ohms
Output 4.0 mV (1 kHz, 5 cm/sec.)
Channel Balance 2.0 dB (1 kHz)
Stylus Shape 0.3 x 0.7 mil elliptical
Cantilever Aluminium pipe
Mount Half-inch
Replacement Stylus AT-VMN95E
Coil Impedance 3.3 k ohms (1 kHz)
DC Resistance 485 ohms
Load Capacitance 100 to 200 pF
Coil Inductance 550 mH (1 kHz)
Vertical Tracking Angle 23°
Dimensions 17.2mm H × 18.9mm W × 28.3mm D
Weight 6.1g
Accessories Included Two 11mm installation screws, two 8mm installation screws, two washers, nonmagnetic screwdriver

See the Audio Technica Cartridge range HERE

Additional Information

Enquiry