Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Legacy Audio AERIS Floor Standing Speakers

SKU: AERIS Category: Brand:

Description

The Legacy Audio AERIS is a speaker system whose striking looks are matched only by its performance capabilities. This 4.5-way system is the first to use the Legacy Dual Air Motion Tweeter (an advanced AMT design) and features open-air dipole midrange, dual subwoofers with internal bass amplification, room correction and craftsmanship display options.

Legacy Audio AERIS Features and Specifications:

AERIS is the first to use the Legacy Dual Air Motion Tweeter (an advanced AMT design) with high power handling and high efficiency, and a titanium encrusted 8” midrange with an enormous motor structure imported from Italy. The bottom end is highlighted by a 10” midbass and dual 12” subwoofers. The dual 12″ woofers of the Aeris deliver unprecedented linear output with snap and definition with rich upper bass and clean transition to the lower midrange owing to a 15 lb motor structure.

The bass section is powered by 1,000 watts of included ICEpower® amplification and offers an exceptional extension to 18Hz. The included 24-bit DSP Wavelaunch room correction features balanced analog inputs and outputs for optimizing performance. The upper portion of the speaker cabinet is an open-air dipole design for fast decay of mid-bass frequencies and airy spacious highs. The elegant design employs a 2.25” thick baffle with 2” sidewalls. LED Crossover Illumination within the upper portion of the cabinet reveals the intricately wired crossover design.

AERIS utilizes radiation control via the hybrid dipolar cabinet. Side-wall radiation is greatly reduced while DSP is employed to divide, align, and contour the response. The user needs to supply two channels of amplification and the Wavelaunch processor allows easy gain matching via its output level controls. Room response deviations can be reduced dramatically with the 8 bands of parametric EQ provided on each of the 4 inputs and 8 outputs of the included Wavelaunch processor. Aeris can also be upgraded with the award-winning Wavelet processor for the highest level of performance and even more control.

Specifications:

Application:

  • DSP based bi-amped hybrid dipole

System Type:

  • 6 driver, 4.5 way

Tweeter:

  • Dual Air Motion Tweeter System- 1″ AMT super tweeter & 4″ AMT tweeter

Midrange:

  • 8″ titanium encrusted, accordion edge with 6 lb magnetic structure

Midwoofer:

  • 10″ accordion edge with 10 lb magnetic structure

Subwoofer:

  • Dual 12″ ultra-linear bass drivers with 15 lb motor

Passive Radiator:

  • 10″ Mass loaded pneumatic

Low Frequency Alignment:

  • Hybrid Cardioid, dual rear ported

Inputs:

  • 1 Pair binding posts for Upper range, 1 XLR balanced for Bass

Internal Amplification:

  • Dual 500w ICEpower amplifiers

Recommended Amplification:

  • 1 External channel of 15-500w is required. Bass section is driven with 1000w of internal power

Freq. Response (Hz, +/-2dB):

  • 18-30k includes 24-bit processor

Impedance:

  • 4 Ohm/ 10k amp Input

Sensitivity:

  • 95.4 dB (2.83V@1m)

Crossover (Hz):

  • 80, 2.8k, 8k

Cabinet Dimensions HxWxD (inches):

Upper Cabinet:

  • 58 x 14.5 x 16

Base:

  • 1 x 19 x 17.5

Weight:

  • 182 lbs each

Shipping Weight:

  • 301 lbs each

Colour Options:

Note: Price and build time varies depending on the colour

Additional Information

Enquiry