The Krix ATMOSPHERIX A20 Flush Ceiling Speaker is designed specifically for home cinema where flush ceiling speakers must be used. Traditionally using flush ceiling speakers is not recommended as a flush ceiling speaker faces directly at the floor with sound radiating out towards your feet when you are seated at best, However you can angle most high range drivers which helps a little but not enough for best results. The Atmospherix A20 angles both bass and high range drivers at 20 degrees to face you and your ears when you are seated to deliver superior home cinema results from an in-ceiling speaker!
Featuring an angled baffle behind the slim magnetic grille, the Atmospherix A20 directs sound towards your seating position for improved clarity in high definition music and movies.
Low-Frequency Driver
Cast aluminium basket with a nominal 130mm (5″) doped curvilinear paper cone. 25mm (1″) voice coil wound on high powered aluminium former with copper shorting ring. Vented and double magnet shielded
High-Frequency Driver
26mm (1”) ring radiator tweeter
Input Terminals
Gold plated spring terminals
Frequency Range
45Hz-40kHz in-room response
Power Handling
20 – 120 Watts RMS recommended amplifier power
Sensitivity
90dB for 2.83 volts at 1 metre
Impedance
Nominally 6 Ohms (minimum 3.9 Ohms)
Configuration
2-way
Enclosure Type
Bass reflex, front vented
Dimensions
295mm diameter x 193mm mounting depth
Cut-out Diameter
247mm recommended
Weight
2.5kg each
Supplied as Each
For more information on custom installation and our custom installation division click HERE
Download Info Sheet PDF HERE