Analysis Plus Pro Power Oval Power Cable

Analysis Plus Pre Power Oval uses better than hospital grade plugs that have a Perma-Lock Terminals, Large, high spring-rate contacts, Glass filled high temperature nylon front housing, Polycarbonate rear housing, Stainless hardware mated to a true balance cable for lower common mode noise.  The cable design has hot and cold leads that are symmetrical with a full shield around the hot and cold conductors to eliminated EMI/EMC.  The cable also has the lowest inductance on the market for the lowest noise voltage of any pro power cord. Wattgate IEC.

A fantastic upgrade over any standard power cable. Try it for yourself today. 1.5 meter length is standard, other lengths can be special ordered

Why You Need Analysis Plus Pro Power Oval?

When people design power cords they use massive cable to reduce the noise voltage on the cable. The noise voltage that occurs on the cable is related to L (inductance) and di/dt (the rate of change in the current). You can reduce L by using larger gauge wire but you don’t get much bang for your buck because it is a log function. What this means is that as you keep increasing the gauge of the wire you do not get much improvement for your effort. This is why you see people using very heavy and stiff wires in power cords. I have seen some power cords that are so big and stiff that the CD player connected to them is lifted off the ground. What we have done at Analysis Plus is use computer simulation to optimize the design of a power distribution system. What we discovered is our patented hollow oval design provides a low L cable without having to use stiff and bulky cables. Our cables have a super low noise voltage to reduce the background noise to a minimum. This is extremely important during quiet passages, if you want to hear subtle details (this is very important for classical music fans and for other lovers of live music).The other thing people don’t realize about low frequency noise is that the thin aluminium shield found on many power cords does nothing to reduce this problem. The best way to reduce low frequency noise on cables is to reduce loop area. From our computer simulation and measurements we found our patented hollow oval cables does a great job at this. We have the lowest noise voltage we have seen with our hollow oval design.

Analysis Plus doesn’t just make cables for Hi-Fi and home cinema, the company also manufactures cables for musicians and their equipment, you may recognise some of the artists below that use this fantastic brand of cable;

• JOHN MAYER
• MARTY FRIEDMAN (OF MEGADETH)
• BUDDY STRONG (WITH USHER)
• KENNY LOGGINS
• JACK CASADY (HOT TUNA)
• CHRIS RODRIGUEZ (WITH KELLY CLARKSON)
• JOSHUA FINEBERG PHD (HARVARD SCHOOL OF MUSIC)
• RICK ROSASA (NEIL YOUNG)
• BYRON HOUSE (ROBERT PLANT AND THE BAND OF JOY)
• DANNY RADER (WITH KEITH URBAN)
• BILL BELL (JASON MRAZ)
• JIMMY HERMAN (WITH CARRIE UNDERWOOD)
• JACK SONNI (DIRE STRAITS)
• PAUL CARRACK & JEREMY MEEK
• Plus many more! For a full list of artists that use Analysis Plus and their testimonials click HERE

To see the entire range of Analysis Plus power cable click HERE

Sydney Hi-Fi Castle Hill 14 Day trial Offer*

Purchase a Analysis Plus cable and try it in your system for 14 days swap it back to your pre existing cable and if you are not satisfied that the Analysis Plus is superior bring it back and we will give you a 100% refund*

*conditions apply, talk with our friendly staff about our 14 day trial terms and conditions