Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Krix MX-10 Speaker System

$9,995.00 inc. GST

Description

Krix MX-10, real cinema at home!

Ideal for medium home cinema rooms where high performance is required, this is a fantastic all in one left, centre, right and twin subwoofer solution that will deliver an amazing immersive theatre experience!

Krix has utilised its extensive knowledge of designing, manufacturing and building commercial theatre speaker arrays across the planet into the exciting MX range of home theatre speaker systems. This system comprises of left, centre and right speakers plus two subwoofers. It is specifically designed to be placed behind an acoustically transparent projection screen just like what you experience when you go to a commercial cinema.

Krix MX-10

Krix MX-10 Key Information:

  • Easy to install
  • Krix Infinite Baffle Wall
  • For medium-size rooms
LCR SPEAKER MODULE Specs:

Frequency Range
40Hz-20kHz in-room response

Power Handling
50 – 200 Watts RMS recommended amplifier power

Sensitivity
97dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure Type
Bass reflex, front vented

Low-Frequency Driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered Kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High-Frequency Driver
26mm (1”) doped fabric dome with large roll surround. Ferrofluid cooled. Coupled to a Krix designed 90 x 40 short-throw waveguide

Input Terminals
Gold plated spring terminals

Dimensions
940mm high x 315mm wide x 205mm deep (2025mm wide including subwoofer modules)

SUBWOOFER MODULES

Frequency Range
25Hz-200Hz in-room response

Power Handling IEC AES
450 Watts

Power Handling Program
900 Watts

Sensitivity
92dB for 2.83 volts at 1 metre

Impedance
4 Ohms

Enclosure Type
Bass reflex, down-firing vent

Low-Frequency Driver
Nominal 305mm (12”) diameter paper cone driver with 50mm (2”) long-throw voice coil developed for high level, low-frequency reinforcement

Input Terminals
High-level gold plated spring terminals

Dimensions
940mm high x 540mm wide x 205mm deep (2025mm wide including LCR modules)

SYSTEM RECOMMENDATIONS

Min. Screen Size 16:9
92″ (2037mm x 1146mm)

Minimum Screen Size 21:9
100″ (2335mm x 1001mm)

Please note speaker system subwoofer power amplifier and surround speakers available at an extra cost. Please contact us for further information.

Additional Information

Enquiry