Unison Research Max 2 Speakers

The Unison Research MAX 2 model is designed to be matched, in particular, to the Unison Research valve amplifiers. For this purpose, not only the sensitivity but also the impedance were optimized. The MAX 2 is a two-way floor standing, reflex-loaded system, of important size however compact. The reflex ducts are front-firing to make easier to place the diffusers in the room. This speaker can also be used as front channel in home theater systems. With two pairs front and rear, you get a high- impact home theater system that does not require a center channel or sub-woofer.

Unison Research Max 2 Specs:

• System: Floor standing – front firing Reflex
• Loudspeakers: 1 x 15” woofer
• 1 x 1.4 “ compression driver with titanium diaphragm
• Numbers of ways: 2 way
• Frequency Response: 30-20000 Hz
• Cross-over: Woofer low-pass 12 dB
• Tweeter high- pass 6 dB
• Crossover Frequency 800 Hz
• Power: 500 watt RMS
• Amplifier: from 10 to 200 Watt RMS or more – without clipping
• Sensibility: 96 dB @2.83Vrms/1 meter
• Nominal impedance: 8 ohm ( 7.4 ohm min )
• Size: 101h x 43,5w x 54d cm
• Weight: 60 Kg each