Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Sonance BPS8 Subwoofer System

Category: Brand:

Description

  • Designed to enhance bass levels when combined with Visual Performance Series speakers.
  • Creates depth and fullness at low and medium listening levels and deep punchy bass at louder volumes.
  • Consistent low-profile design with other Visual Performance Series speakers.
  • Available in round, square or rectangle to achieve a consistent aesthetic.

BPS8 SUBWOOFER

8″ (203mm) dual voice coil, carbon fiber/ Rohacell laminated cone with a rubber surround
30Hz – 90Hz – ±3dB
6 ohms nominal; 4 ohms minimum
150 watts maximum
90dB SPL (2.83V/1 meter)
9 1/4″ x 12 5/16″ x 24″ (235mm x 313mm x 610mm)
45 lbs (20.41 kg) each
*VPBPC4R or VPBPC6R (Bandpass Connectors with Grilles)
VPBPC6R Bandpass Connector
Number Of Channels
Power Output All Channels Driven
Total Harmonic Distortion
Signal To Noise Ratio
Input Sensitivity
Input Impedance
Power Consumption
AC Fuse
Heat Output
Controls
Rack Space Requirement
Available Options
Dimensions With Feet (WxHxD)
RMF Dimensions No Feet (WxHxD)
Shipping Weight

SONAMP A150

1
90 watts RMS @ 4 ohms
.05% (20Hz – 300Hz @ 8 ohms)
-95dB (w/22kHz A-WTG filter)
25mV for 90 watts RMS @ 4 ohms (volume control @ max) 600mV for 90 watts RMA @ 4 ohms (Bypass model)
20k ohms
160 watts maximum (4 ohms, full power) 13 watts idle (no signal)
4A (T4AL ~ 250V)
98 BTU/HR @ 8 ohms (rock music) 140 BTU/HR @ 4 ohms (rock music)
Variable crossover freq and output level, Phase switch, Bypass switch
2U
Rack Mount Ear Kit
16 3/4″ x 4″ x 13 1/2″ (425mm x 102mm x 343mm)
19″ x 3 1/2″ x 13 1/2″ (489mm x 89mm x 343mm)
20 lbs (9.1kg) each

Additional Information

Enquiry