Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Sonance VP10 Sub & VP10 Sub Amp Combo

Description

  • Integrated cabinet for optimum performance and minimal sound transfer into adjoining rooms.
  • State-of-the-art design and cutting-edge materials deliver the bass of a large cabinet subwoofer without sacrificing floor space.
  • Shallow design fits into a standard 2X4 wall cavity.
  • Provides a consistent aesthetic with other Visual Performance Series speakers.
  • Custom-tuned amplifiers ensure optimum sonic performance.

VP10SUB

10″ (254mm) laminated carbon fiber cone with a rubber surround
34Hz – 250Hz ±3dB
8 ohms nominal
90dB (2.83V/1) meter
Perforated steel
15″ x 15″ x 3 7/8″ (381mm x 381mm x 98mm)
12 3/4″ x 12 3/4″ (324mm x 324mm)
13 lbs (6kg) each
In-Wall Subwoofer - Line Art
  • Line or speaker level connections provide a flexible install solution.
  • Front facing controls allow for ease of fine-tuning your system.
  • Capable of driving two (2) individual woofers at the same time.
  • Variable crossover and output level controls.

VP10SUB AMP

230 watts @ 8 ohms (1% THD, 32hz) 370 watts @ 4 ohms (1% THD, 32hz)
1.0% (20Hz – 250Hz@8ohms)
-95dB (w/22kHz A-WTG filter)
50mV for 230 watts @ 8 ohms (volume control @ max) (500mV for 230 watts @ 8 ohms (bypass mode)
10k ohms
588 watts maximum (4 ohms, full power, sine wave) 396 watts maximum (4 ohms, full power, music) 22 watts idle (no signal)
8A (T8A ~ 250V)
102 BTU/HR @ 8 ohms (music, full power) 183 BTU/HR @ 4 ohms (music, full power)
Variable crossover freq and output level, Phase switch, Bypass switch
2U
Rack Ears included
16 3/4″ x 3 7/8″  x 13 1/2″ (425mm x 98mm x 343mm)
19″ x 3 1/2″ x 13 1/2″ (483mm x 89mm x 343mm
19 lbs (8.6kg) each
Single Channel Amplifiers - Line Art

Additional Information

Enquiry