$26,000.00 inc. GST
The Esoteric S-02 delivers outstanding performance and unsurpassed clarity that allows the listener not only to hear the music but also to feel the music, by helping to reproduce the emotion that is the essence of an involving musical experience
The indescribable feeling of spaciousness that comes when sound is truly unleashed and the sense that the music you’re hearing is truly live, can only be generated by amplifiers that offer abundant power to properly drive the loudspeakers. Esoteric’s amplifiers use the finest components and massive power supplies to achieve the high output power this demands. Faithfully incorporating the design philosophy of our Monoblock M1 amplifier, the new S-02 sets free every nuance of sound, and imparts to music all the vibrancy and richness of life. 。
Loudspeaker impedance can vary widely depending on the frequencies being reproduced. The fast attack of deep bass imposes demanding loads on an amplifier, requiring not only continuous high power output, but also repeated bursts of peak power. Unless the amplifier’s power supply is capable of consistently meeting these demands, musical dynamics will be compromised. The S-02’s generous power supply capacity enables this nominally rated 145W into 8 ohms amplifier to deliver an impressive 580W into 2 ohms – a testament to the linearity of a power supply that faithfully reproduces the full spectrum of sound dynamics at all volume levels.
A robust power supply is critical to an amplifier’s ability to deliver high power in a linear manner. This is especially true for the power transformer, so great attention was paid to the material selection, core size and even mounting of the S-02’s custom-made EI-type power transformer. Popular among avid audiophiles, this transformer was selected for the full-bodied, high-quality bass it provides. To preserve sound purity, this large-core 940VA transformer features separate windings for left and right channels and is securely mounted on a rigid, 5mm-thick steel base plate. Three parallel 4,700µF capacitors per channel shorten charge and discharge times and provide a tighter, faster sound. Power supply wiring uses heavy-duty cables fitted with crimp terminals, which are tightly bolted together to reduce impedance to the lowest levels possible.
optimizing the S-02’s loudspeaker drive capability required reducing the output impedance to an absolute minimum. To achieve this, a total of nine bus bars were used for each channel, while the output coil was eliminated. Strenuous efforts were also made to simplify the circuit design and widen its range, resulting in an exceptional damping factor of 1,000, considered a guideline for woofer drive capability. Even large-diameter woofers are provided with accurate damping for precise sound reproduction, giving an expansive feel across a wide range that reaches to even the lowest frequencies.
The S-02’s audio input signal enters through discrete balanced input buffer amplifiers and is relayed to the amplification stage by way of a balanced low-impedance signal path. An outstanding dynamic range is assured by clean, noise-free signal amplification that provides the fine sensitivity needed to reproduce nuanced gradations between musical crescendos and silence.
The S-02’s large bipolar LAPT* transistors are twice the size of more commonly used power transistors. They also boast an exceptional continuous current capacity of 17 amps and an instantaneous peak capacity of 34 amps. In addition, they offer superior high-frequency characteristics that contribute to the accurate reproduction of subtle tonal qualities.
* LAPT=Linear Amplified Power Transistor
The S-02’s unique LIDSC circuit reduces the drive section’s second stage to the final stage output impedance while enhancing current supply capability. This makes it possible to maximize amplitude within the available power supply voltage while reducing distortion, and so give this compact Stereo Power Amplifier a loudspeaker drive capability approaching that of the Monoblock M1.
Simplifying the amplifier circuitry and reducing the previous stage’s gain results in greatly reduced Negative Feedback (NFB) for a more natural and life-like sound.
The Esoteric S-02 employs highly reliable XLR and RCA input connectors, and loudspeaker terminals produced by WBT of Germany. Other high-grade components include low-impedance electrolytic capacitors and transistors featuring superior high-frequency characteristics.
|Rated output power||145W + 145W (8Ω)
290W + 290W (4Ω)
|Maximum output power||580W + 580W (2Ω)|
|Analog audio inputs|
|AC 230V, 50Hz|
|AC 120V, 60Hz|
|AC 220V, 60Hz|
|Power consumption||440W (no signal: 160W)|
|External dimensions (W×H×D)||445 × 221.5 × 489.6mm
17-⅝” × 8-¾” × 19-⅜” (including protrusions)
|Weight||48kg / 105-⅞ lb|
|Included accessories||Power cord × 1
Power cord support bracket × 1
Power cord support bracket screw × 2
Felt pads × 4
Owner’s manual × 1
Warranty card × 1
|Frequency response||5Hz to 100kHz (+0dB, –3dB, 8Ω)|
|S/N ratio||115dB (IHF-A)|
|Total harmonic distortion||0.003% (1kHz, 8Ω, 145W)|