- Supporting subwoofer for Series MX systems
- Can also be used as a primary subwoofer
- The shallow design allows for greater placement options
$2,595.00 – $2,820.00 inc. GST
The Krix Cyclonix 15 has taken its design cues from the subwoofer modules in the MX-20 modular wall of sound system, foregoing the acoustic absorbent material on the front baffle and instead offering an optional black cloth grille. The large 380mm bass driver features a 100mm edge-wound copper voice coil, dual spider assembly and vented magnet assembly. The front-firing vent and high-sensitivity driver are tuned to achieve maximum output, resulting in an incredibly efficient subwoofer for high drive level applications. Proprietary Krix rubber feet provide improved acoustic isolation on hard and soft floor surfaces.
The Cyclonix range of subwoofers is designed for edge-of-your-seat bass performance in dedicated home cinema rooms. Their shallow depth allows them to be placed inconspicuously against a side or back wall as supporting subwoofers to a Series MX system. They can also be used as the main subwoofers in a dedicated home cinema system – either behind an acoustically transparent screen or elsewhere in the room.
A separate power amplifier is required for this subwoofer and can be connected to the LFE output of any AV processor or receiver.
25Hz-200Hz in-room response
200 – 1400 Watts RMS recommended amplifier power
High Pass Filter: 25 Hz 24dB / Octave Butterworth
Limiter: 1000W (8 Ohms)
High current spring terminals featuring a 5mm hole to accept up to 10AWG cable
Bass reflex, front vented
1015mm high x 550mm wide x 270mm deep (290mm deep with optional grille)
Single 380mm (15”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly
96 dB SPL (2.83V / 1m)
Download a specification sheet HERE
|With or Without Grille||
With Grille, Without Grille