Audio Technica AT-LP120xBT-USB Turntable
Description
The Audio Technica AT-LP120xBT-USB adds Bluetooth 5.0 technology for seamless connectivity to your wireless speaker setup. This turntable features a DC servo direct-drive motor, along with adjustable dynamic anti-skate control and selectable phono preamplifier. The fully manual turntable plays 33-1/3, 45, and 78 RPM records and is equipped with a USB output that allows direct connection to your computer. In addition to the Bluetooth and USB outputs, the turntable also comes with a detachable dual RCA output cable and is equipped with a built-in selectable phono preamp so you can connect directly to your home stereo. So whether it’s Bluetooth, USB, or Hifi connectivity you’re after, the LP120xBT-USB has you covered.
Audio Technica AT-LP120xBT-USB Key Features:
- High-fidelity audio with Bluetooth wireless technology
- Direct-drive, DC servo motor
- Fully manual operation
- Adjustable dynamic anti-skate control
- Selectable 33/45/78 RPM speeds
- Anti-resonance, die-cast aluminium platter with felt mat
- AT-HS6 universal ½”-mount headshell and AT-VM95E Dual Moving Magnet™ phono cartridge with 0.3 x 0.7 mil elliptical stylus
- Balanced S-shaped tonearm with hydraulically damped lift control and lockable rest
- Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology, to wired audio systems and powered speakers via included dual RCA output cable, or to computers via included USB cable
- Compatible with the high-quality Qualcomm® aptX™ audio codec
- Built-in switchable phono preamplifier for phono- or line-level output
| Communication specifications |
| Communication system |
Bluetooth version 5.0 |
| Frequency band |
2.402 GHz to 2.480 GHz |
| Support codec |
Qualcomm® aptX™ audio, SBC |
|
|
| Turntable specifications |
| Type |
3-speed, fully manual operation |
| Motor |
DC servo motor |
| Drive Method |
Direct drive |
| Speeds |
33-1/3 RPM, 45 RPM, 78 RPM |
| Turntable Platter |
Die-cast aluminium |
| Starting Torque |
> 1.0 kgf.cm |
| Braking System |
Electronic brake |
| Wow and flutter |
< 0.2% WRMS (33 RPM) at 3 kHz |
| Signal-to-noise ratio |
> 50 dB |
| Output levels |
“PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec
“LINE”: 240 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-amp gain |
36 dB nominal, RIAA equalized |
| USB function |
| A/D, D/A |
16 bit 44.1 kHz or 48 kHz USB selectable |
| Computer interface |
USB 1.1 Compliant Windows 8 or above, or MAC OSX or above |
| General specifications |
| Power supply requirements |
100 to 240 V, 50/60 Hz, 1.5 A Max. |
| Power consumption |
3.2 W |
| Dimensions |
452.0 mm × 352.0 mm × 141.6 mm (W × D × H) |
| Weight |
8 kg (17.6 lbs) (without dust cover) |
| Accessories Included |
Dust cover, Felt mat, Platter, Counterweight, Headshell (AT-HS6) with VM stereo cartridge (AT-VM95E), 45-RPM adapter, Stylus target light, Dust cover hinges, USB cable (1.9 m), RCA audio cable (approx.1.4 m), AC adapter (approx.1.3 m) |
Additional Information
