Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Audio Technica AT-LPW50PB Turntable

$699.00 inc. GST

SKU: AT-LPW50PB Category: Brand:

Description

The Audio Technica AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM. The turntable includes a straight, matte-finish, carbon-fibre tonearm with adjustable tracking force and an AT-HS4 universal ½”-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Audio Technica AT-LPW50PB Information:

  •  Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  •  Motor features a speed-sensor system to maintain accurate platter rotation speed
  •  Adjustable dynamic anti-skate control
  •  Professional anti-resonance, die-cast aluminium platter with rubber mat
  •  AT-HS4 universal ½”-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
  •  AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  •  Straight, matte-finish, carbon-fibre tonearm with hydraulically damped lift control and lockable rest
  •  Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with a high-gloss, piano-black finish
  •  High-isolation, height-adjustable feet
  •  Built-in switchable phono preamplifier for phono or line-level output
  •  AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  •  Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Specs:

Type Belt-drive manual turntable
Motor DC servo with Active Speed Stabilization
Drive Method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminium
Wow and Flutter < 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio >60dB
Output Level Pre-amp “PHONO”: 4.0 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
Power Supply Requirements 100-240 V, 50/60 Hz, 0.5 A Max.
Dimensions With dustcover: 420.0 mm W x 356.0 mm D x 126.0 mm H
Without dustcover and hinges: 420.0 mm W x 356.0 mm D x 114.0 mm H
Weight 5.56 kg without dust cover
Tonearm type Static balanced straight carbon tonearm
Effective arm length 223.6 mm
Overhang 18.6 mm
Tracking error angle <2 degrees
Applicable cartridge weight 12-17 g
Stylus pressure adjustment range 0-3 g
Replacement Stylus AT-VMN95E BK
Accessories Included Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge (black), 45-RPM adapter, RCA audio cable (approx. 1.0 m), AC adapter (approx. 1.5 m), Dust cover hinges

Additional Information

Enquiry