Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Soulines Dostoyevsky DCX Turntable (Without Tonearm)

$4,800.00 inc. GST

Category: Brand:


Dostoyevsky DCX was conceived as a “classic” turntable, wooden square box with platter and tone-arm on the top. Idea was to build around “classical turntable look” while incorporating design and engineering required for great sounding turntable.
The bearing is the heart of every turntable, “everything spins around bearing”. Dostoyevsky DCX incorporate the same inverted main bearing made from solid brass and stainless steel, as is used in our more advanced models Hermes DCX and Kubrick DCX. It is extremely high precision machined and employs Derlin thrust plate.

Chassis is made from the three 20mm thick layers of Baltic Birch plywood, bonded together, and it is a two box design, main plinth and motor unit. The remotely sited motor unit with drive motor, electronic controller and switches, is practical solution to ensure vibration isolation of the main plinth. Main plinth and motor unit are supported by small silicon-rubber feet providing optimum coupling to the surface, and good vibration transmitting control.

While looking “square” and simple from the outside, the main plinth employs advanced vibration control design, by means of different curved triangular openings in the two lower plywood layers.

Drive mechanism utilizes high quality DC motor optimized for turntable use. Along with an easy operation and fine speed adjustment feature, electronically controlled power supply provides  stable  current  for  smooth  motor  rotation.

The platter, 40mm thick and weighing 2.6kg is machined from PTE to very high accuracy  and ensures good speed stability. High-performance rubber-cork mat is supplied as a standard.

Acrylic (Perspex) dust cover, the SA cover is supplied as a standard.


Drive: electronically controlled quality DC motor
Speeds: 33.33 and 45.00 RPM with fine speed adjustment feature
Bearing: inverted solid brass/stainless steel; Derlin thrust plate
Platter: 40mm thick 2.6kg weighing, machined from PTE
Chassis: three 20mm thick layers of Baltic Birch plywood, bonded together
Finish: fine sanded by hand; natural Baltic Birch plywood satin finish
Power: AC 230V/50Hz; DC input 12V/300mA
Dimensions: Main plinth:325x350x150mm (WxDxH); Net weight: 7.5kg
Motor unit: 120x350x85mm (WxDxH); Net weight: 2.0kg
Overall footprint: 460x350mm (WxD);
Net weight: 9.5kg
Packaging: 530x400x260mm (WxDxH)
Shipping weight: 12.5kg

Additional Information