Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Audio Technica AT-ART1000 Moving Coil Cartridge

$6,999.00 inc. GST

Categories: , Brand:

Description

The Audio Technica AT-ART1000 is part of Audio Technica’s exclusive excellence program where only the very best of components are offered to deliver the highest listening experience possible.

the Ear.net 2017 product of the year

Audio Technica AT-ART1000 key features:

  • Direct power system (The moving coil si placed directly above the stylus tip)
  • Special line contact diamond tip stylus and a solid boron cantilever
  • Non-magnetic core coil, a 20 μm diameter PCOCC wire wound eight turns to a diameter of 0.9 mm is used
  • Despite being a non-magnetic core type, an output voltage of 0.2 mV is obtained by placing a 3 ohms coil in the minuscule 0.6 mm gap of a powerful magnetic circuit
  • Titanium body
  • Polymer cover and aluminium housing
  • Cartridge rebuild service available

Cartridge Type = Direct Power System, non-magnetic core coil (MC) type

Frequency response = 15 to 30,000 Hz

Output voltage = 0.2 mV (1 kHz, 5 cm/sec.)

Channel separation = 30 dB (1 kHz)

Output balance = 0.5 dB (1 kHz)

Tracking force = due to the unique construction of the AT-ART1000, each individual cartridge is supplied with its own tracking force measurement to allow optimum setting, which is between a range of 2.0 to 2.5g

Coil impedance = 3 ohms (1 kHz)

DC resistance = 3 ohms

Load impedance = ≥ 30 ohms (when connected

Coil inductance = ≤ 1 μH (1 kHz)

Static compliance = 30×10-6cm/dyne

Dynamic compliance = 12×10-6cm/dyne (100Hz)

Stylus = Special line contact stylus

Cantilever = 0.26 mm (0.01”) diameter solid boron

Vertical tracking angle = 21°

Dimensions (H×W×D) = 17.3mm ×17.0mm ×25.5mm

Weight = 11 g

Additional Information

Enquiry