Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Audio Technica AT-OC9XEB Moving Coil Cartridge

$469.00 inc. GST

SKU: OC9XEB Category: Brand:

Description

Audio Technica AT-OC9XEB dual moving coil stereo cartridge with bonded Elliptical stylus. The OC9XEB includes threaded inserts in the cartridge body that enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required!

Audio Technica AT-OC9XEB key Features:

  • Features bonded Elliptical stylus and aluminium cantilever
  • A neodymium magnet and pure iron yoke provides increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
  • Aluminium body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible

Specs

Type: Dual Moving Coil
Body Material: Aluminum
Frequency Response: 20-30,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output: 0.32 mV (at 1 kHz, 5 cm/sec)
Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: Elliptical bonded
Stylus Type: Bonded round shank
Stylus Curvature Radius: 0.3 x 0.7 mil
Cantilever: Aluminum pipe
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil: PCOCC
Terminal Pins: Brass
Mount: Half-inch
Weight: 7.6 g (0.3 oz)
Dimensions: 17.3 x 16.8 x 25.7

 

See the entire Audio Technica cartridge range HERE

Additional Information

Enquiry