Mon-Fri 9am - 5.30pm / Sat 9am - 5pm / Sun - Closed
FREE SHIPPING IN AUS(Orders Over $300)

Audio Technica AT-OC9XSH Moving Coil Cartridge

$1,249.00 inc. GST

SKU: OC9XML-1 Category: Brand:

Description

Audio Technica AT-OC9XSH is a dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation. The OC9XSH aluminium body minimizes unwanted vibration for reduced resonance and superior audio reproduction

Audio Technica AT-OC9XSH key Features:

  • Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
  • The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
  • The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
  • Features nude Shibata stylus and boron cantilever for rich full-range audio reproduction and high transient response
  • A neodymium magnet and permendur yoke provide dramatically increased magnetic energy
  • Aluminium body minimizes unwanted vibration for reduced resonance and superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

Spec’s

Type: Dual Moving Coil
Body Material: Aluminum
Frequency Response: 20-47,000 Hz
Channel Separation: 27 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output: 0.4 mV (at 1 kHz, 5 cm/sec)
Channel Balance: 1.0 dB (1 kHz)
Stylus Shape: Shibata
Stylus Type: Nude square shank
Stylus Curvature Radius: 2.7 x 0.26 mil
Cantilever: 0.28 mm diameter nude boron
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance: 16 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil: PCOCC
Terminal Pins: Brass
Mount: Half-inch
Weight: 7.6 g (0.3 oz)
Dimensions: 17.3 mm x 16.8 mm x 25.7 mm

See the entire Audio Technica cartridge range HERE

Additional Information

Enquiry