The Audio Technica AT-VM95EN Series cartridge with 0.3 x 0.7 mil elliptical nude stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.
Audio Technica AT-VM95EN Features:
- VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical nude stylus
- Aluminium cantilever
- Durable low-resonance polymer housing
- Threaded inserts in the cartridge body enable the cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
Specifications:
| Frequency Response | 20-23,000 Hz |
| Channel Separation | 22 (dB at 1 kHz) |
| Vertical Tracking Force | 1.8-2.2g (2.0g standard) |
| Stylus Construction | NNude round shank |
| Recommended Load Impedance | 47,000 ohms |
| Output | 3.5 mV (1 kHz, 5 cm/sec.) |
| Channel Balance | 2.0 dB (1 kHz) |
| Stylus Shape | 0.3 x 0.7 mil elliptical |
| Cantilever | Aluminium pipe |
| Mount | Half-inch |
| Replacement Stylus | AT-VMN95EN |
| Coil Impedance | 3.3 k ohms (1 kHz) |
| DC Resistance | 485 ohms |
| Load Capacitance | 100 to 200 pF |
| Coil Inductance | 550 mH (1 kHz) |
| Vertical Tracking Angle | 23° |
| Dimensions | 17.2mm H × 18.9mm W × 28.3mm D |
| Weight | 6.1g |
| Accessories Included | Two 11mm installation screws, two 8mm installation screws, two washers, nonmagnetic screwdriver |
See the Audio Technica Cartridge range HERE
