$7,995.00 inc. GST
The JL AUDIO Fathom F112V2 is suitable for rooms up to medium size and performs brilliantly for movies, tv and music. Download the info sheet at the bottom of the page for more information or please get in contact with our friendly staff. For best performance as with any subwoofer, Sydney Hi-Fi Castle Hill recommends at least two subwoofers to maximise bass response.
The challenges associated with designing high-output, compact subwoofer systems can be daunting. In most cases, designers sacrifice low-frequency extension or output capability in order to keep a design acceptably small. The Fathom® subwoofers sacrifice nothing, thanks to the
dynamic advantages of their proprietary JL Audio drivers. These exceptional woofers allow for a true subwoofer passband and very high output while keeping distortion well below audible thresholds. To extract full benefit from the excursion envelope of its woofer design, each Fathom employs an uncommonly powerful switching amplifier with a large toroidal transformer and a patented circuit, designed to enhance control and fidelity. The compact design and conventional form factor of the Fathoms apply beautifully to most home theatre applications, including built-in designs. Front-mounted controls make them comfortable to set up and adjust, while JL Audio’s powerful DSP engine and exclusive Digital Automatic Room Optimization makes sure that response is smooth, even in challenging rooms. While very compact, the f112v2 is powerful enough to anchor serious home theatre setups and is equally at home in the most critical music listening applications. For that very reason, it is used in some of the best recording and mastering studios in the world
JL AUDIO Fathom F112V2 Key Information:
General Spec:
| Enclosure Type | Sealed |
| Enclosure Finish | Black Gloss |
| Frequency Response (Anechoic) | 21 – 119 Hz (±1.5dB) -3 dB at 19 Hz / 150 Hz -10 dB at 17 Hz / 167 Hz |
| Effective Piston Area (Sd) | 84 sq in / 0.0542 sq m |
| Effective Displacement | 287 cu in / 4.7 L |
| Amplifier Power | 1.8 kW RMS short-term |
| Power Mode(s) | Off, On or Automatic (Signal-Sensing) |
| Light Modes | Off, On or Dim |
Signal Processing:
| Unbalanced Inputs | Stereo or Mono (two RCA jacks) |
| Balanced Inputs | Stereo or Mono (two female XLR jacks) |
| Speaker/High-Level Inputs | N/A |
| Input Grounding | Isolated or Grounded |
| Input Modes | Master or Slave |
| Level Control | Reference (fixed gain) or Variable, from full mute to +15dB over reference gain |
| Filter Mode(s) | Low-Pass |
| Filter Slope(s) | 12/24 dB/octave |
| Filter Frequency Range | 30 Hz – 130 Hz |
| Filter Defeat Function | Yes |
| Polarity | 0 or 180 degrees |
| Phase | Variable, 0 – 280 degrees |
| Extreme Low Frequency (E.L.F.) Trim | Variable, -12 dB to +3 dB at 25 Hz |
| Line Outputs | N/A |
| Output to Slave | Balanced (one male XLR jack) |
| Calibration Mode | Digital Automatic Room Optimization (D.A.R.O.), incudes laboratory-grade microphone |
Physical Specifications
| Width (W) | 384 mm |
| Height (H) | 470 mm |
| Depth (D) | 451 mm |
| Net Weight | 53 kg |
| Note: Height dimensions include feet. | |
Download Infosheet HERE
