The Krix Cyclonix 12 has taken its design cues from the subwoofer modules in the MX-10 modular wall of sound system, foregoing the acoustic absorbent material on the front baffle and instead offering an optional black cloth grille. The 305mm bass driver features a 50mm voice coil with a ventilated magnet system. The dual down-firing vents are tuned to achieve maximum output, while the proprietary Krix rubber feet provide improved acoustic isolation on hard and soft floor surfaces.
The Cyclonix range of subwoofers is designed for edge-of-your-seat bass performance in dedicated home cinema rooms. Their shallow depth allows them to be placed inconspicuously against a side or back wall as supporting subwoofers to a Series MX system. They can also be used as the main subwoofers in a dedicated home cinema system – either behind an acoustically transparent screen or elsewhere in the room.
A separate power amplifier is required for this subwoofer and can be connected to the LFE output of any AV processor or receiver. Call for further information
Krix Cyclonix 12 Features and Specifications:
- Supporting subwoofer for Series MX systems
- Can also be used as a primary subwoofer
- The shallow design allows for greater placement options
Frequency Range
25Hz-200Hz in-room response
Amplifier Power
200 – 500 Watts RMS recommended amplifier power
Recommended Processing
High Pass Filter: 30 Hz 24dB / Octave Butterworth
Limiter: 500W (4 Ohms)
Inputs
High current spring terminals featuring a 5mm hole to accept up to 10AWG cable
Enclosure Type
Bass reflex, dual down-firing vents
Dimensions
940mm high x 540mm wide x 190mm deep (210 mm deep with optional grille)
Impedance
4 Ohms
Low-Frequency Driver
Nominal 305mm (12”) diameter paper cone driver with 50mm (2”) long-throw voice coil developed for high level, low-frequency reinforcement
Sensitivity
92 dB SPL (2.83V / 1m)
Weight
26 kg
Download a specification sheet HERE
