Use Krix Dynamix Mk3 as surround speakers in your theatre to hear the crackle of leaves underfoot and the sharpness of the violin as the thriller hits its peak. Be immersed in cinema-quality sound at home with the wedge-shaped design of the Dynamix Mk3, with the same 15 degrees angled baffle used in Krix’s commercial cinema surround speakers, providing the ultimate sound experience.
Krix Dynamix Mk3 Inforamtion:
Ideal as side or rear surround speakers in a multichannel setup, the Dynamix Mk3 is designed to complement the Krix range of front speakers, bringing surround effects right to your seat with stunning realism.
- Bring movies to life
- 15 degree angled front baffle
- Easy wall mounting
Frequency Range
45Hz-40kHz in-room response
Power Handling
20 – 120 Watts RMS recommended amplifier power
Sensitivity
88dB for 2.83 volts at 1 metre
Impedance
Nominally 6 Ohms (minimum 3.6 Ohms)
Configuration
2-way
Enclosure Type
Bass reflex, front vented with rear terminal plate
Dimensions
355mm high x 245mm wide x 200mm deep at the top (110mm deep at the bottom)
Low-Frequency Drivers
Cast aluminium basket with a nominal 130mm (5″) doped curvilinear paper cone. 30mm (1.2″) vented magnet voice coil wound on high-temperature Kapton former, with copper shorting ring
High-Frequency Driver
26mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual-chambered magnet structure with copper shorting ring to lower distortion
Input Terminals
Gold plated binding posts
Mounting
Key-hole style bracket, located on the rear of the cabinet
Weight
6kg each