The Krix LX-7 is a stylish, high-performance passive loudspeaker, custom-built in Australia for screen sizes 75 inches and above.
Featuring left, centre and right channels, it can be combined with surround speakers and an AVR/processor to create a genuine, immersive cinema soundscape without the need for virtual or ‘bouncing’ effects. The sleek design requires minimal space above or below your screen. The LX-7 is intended to be combined with a Krix subwoofer(s) to accurately reproduce the lowest frequencies for the highest level of home cinema performance.
Krix LX-7 Features:
Tilting bracket
Using the included bracket, the LX-7 can be mounted flush against the wall or at adjustable angles up to 15 degrees for optimal sound dispersion.
Tonally matched
The LX-7 is tonally matched to all Krix surround and overhead speakers.
Unparalleled Sound
Three 90 x 90 Krix short throw waveguides significantly improve dispersion characteristics and increase efficiency for very high output levels.
For the ultimate sound experience at home, play it through Krix!
60Hz-20kHz in-room response
Power handling
50-250 Watts RMS recommended amplifier power
Sensitivity
92dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented, 12mm braced MDF
Dimensions
Various – see specification sheet
Low-frequency driver
Single 165mm (6 1/2”) paper cone. 50mm (2”) voice coil wound on high-powered Kapton former, with ventilated spider and aluminium flux stabilisation ring for low distortion
High-frequency driver
26mm (1”) doped fabric dome with a large roll surround. Ferrofluid cooled. Coupled with a Krix designed 90 x 90 short throw waveguide
Crossover point
1.9kHz
Input terminals
High current terminals featuring 5mm holes to accept up to 10 AWG cable
Weight
Various – see specification sheet