Krix MX-30, real cinema at home!
Ideal for larger home cinema rooms, this is a fantastic solution and alternative to a conventional theatre speaker system and will deliver an amazing immersive theatre experience!
Krix has utilised its extensive knowledge of designing, manufacturing and building commercial theatre speaker arrays across the planet into the exciting new MX range of home theatre speaker systems. This system comprises left, centre and right speakers plus two subwoofers. It is specifically designed to be placed behind an acoustically transparent projection screen just like what you experience when you go to a commercial cinema!
Krix MX-30 Information:
Designed for larger dedicated home cinemas with an acoustically transparent screen, the MX-30 will deliver your favourite movie soundtracks with supreme definition and accuracy, right through the picture and into your seat. Larger bass drivers and compression high-frequency drivers provide an extended frequency response at higher sound pressure levels.
- Behind screen cinema quality speakers
- Easy to install
- Krix Infinite Baffle Wall
LCR SPEAKER MODULES
Frequency Range
38Hz-16kHz in-room response
Power Handling
100 – 700 Watts RMS recommended amplifier power
Sensitivity
98dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure Type
Bass reflex, front vented
Low-Frequency Driver
Single 380mm (15″) high stiffness paper cone driver with 75mm (3″) voice coil of optimal length for an increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion
High-Frequency Driver
A Krix patented designed 90º x 40º short throw horn with 25mm (1”) throat, 35mm (1.4”) compression driver, ferrite magnet, coated titanium diaphragm and polyimide surround
Input Terminals
Gold plated spring terminals
Dimensions
1220mm high x 450mm wide x 335mm deep (2865mm wide including subwoofer modules)
SUBWOOFER MODULES
Frequency Range
25Hz-200Hz in-room response
Power Handling
200 – 1400 Watts RMS recommended amplifier power
Sensitivity
100dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Enclosure Type
Bass reflex, front vented
Low-Frequency Driver
Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly
Input Terminals
High-level gold plated spring terminals
Dimensions
1220mm high x 750mm wide x 335mm deep (2865mm wide including LCR modules)
SYSTEM RECOMMENDATIONS
Recommended Room Depth
5m – 14m
Min. Screen Size 16:9
130″ (2880mm x 1620mm)
Minimum Screen Size 21:9
120″ (2806mm x 1184mm)
Download PDF Spec Sheet HERE
Please note speaker system spacer boxes, subwoofer power amplifier and surround speakers available at an extra cost. Please contact us for further information.
Download PDF Install Guide HERE
