Krix MX-5, real cinema at home!
Ideal for smaller home cinema rooms where high performance is required, this is a fantastic all in one left, centre, right and twin subwoofer solution that will deliver an amazing immersive theatre experience!
Krix has utilised its extensive knowledge of designing, manufacturing and building commercial theatre speaker arrays across the planet into the exciting MX range of home theatre speaker systems. This system comprises of left, centre and right speakers plus two subwoofers. It is specifically designed to be placed behind an acoustically transparent projection screen just like what you experience when you go to a commercial cinema. Alternatively, the MX-5 can be located under the screen.
Want to learn more about the MX5 Modular wall of sound? Why not call our Krix certified system designer who will happily answer your questions, he can even 3d model your room!
Krix MX-5 Key Information and Specifications:
A compact yet powerful entry into the Series MX range, the MX-5 packs a big punch for its size and can be installed below a conventional projector screen or behind an acoustically transparent screen.
- Compact and powerful
- Versatile behind or below screen installation
- For small to mid-size rooms
LCR SPEAKER MODULE Specs:
Frequency Range
40Hz-20kHz in-room response
Power Handling
50 – 200 Watts RMS recommended amplifier power
Sensitivity
92dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure Type
Bass reflex, front vented
Low-Frequency Driver
Single 205mm (8”) paper cone driver. 38mm (1½”) voice coil wound on high powered aluminium former, with ventilated magnet assembly and copper shorting ring for low distortion
High-Frequency Driver
26mm (1”) doped fabric dome with large roll surround. Ferrofluid cooled. Coupled to a Krix designed 90 x 40 short-throw waveguide
Input Terminals
Gold plated spring terminals
SUBWOOFER MODULE Specs:
Frequency Range
30Hz-200Hz in-room response
Power Handling IEC AES
350 Watts
Power Handling Program
700 Watts
Sensitivity
90dB for 2.83 volts at 1 metre
Impedance
4 Ohms
Enclosure Type
Bass reflex, down-firing vent
Low-Frequency Driver
Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former with vented magnet assembly
Input Terminals
High-level gold plated spring terminals
System Recommendations
Minimum Screen Size 16:9
92″ (2037mm x 1146mm)
Minimum Screen Size 21:9
90″ (2101mm x 900mm)
Dimensions
700mm high x 315mm wide x 190mm deep (2025mm wide including subwoofer modules)
Download PDF Spec Sheet HERE
Download PDF Install Guide HERE
Please note speaker system subwoofer power amplifier and surround speakers available at an extra cost. Please contact us for further information.
