Legacy Audio Silhouette On Wall Speaker

SKU: Silhouette Categories: , Brand:

The elegantly styled Legacy Audio Silhouette provides no-compromise performance in an artful 5.125″ deep on-wall / in-wall design. The profile appears even thinner due to the anti-diffractive contoured edges. The robust driver complement and special electrical network yield the optimum response at the listening position. The result is a speaker that does not sound like an on-wall with staging beyond the wall.

Legacy Audio Silhouette Features and Specifications:

On-wall speakers are often dynamically challenged, especially in the lower octaves. This isn’t the case with the Legacy Silhouette. It provides top-to-bottom performance with plenty of slam. The three-way design features a newly engineered 10″ low-profile long-excursion woofer and pneumatically coupled radiator to lay the foundation supporting the high acceleration 7″ silver/graphite midrange. Treble remains clear and airy from the 4″ Legacy AMT ribbon, boasting a high-temperature pleated Kapton diaphragm and neodymium motor.

The internal crossover divides the spectrum precisely where the wall boundary creates a strong dip in the response of conventional speakers. This compensation in the electrical network allows for the appropriate response at the listening position. The result is a speaker that does not sound like an on-wall with staging beyond the wall.

It pairs with the Silhouette Center Channel speaker.

French cleat-mounting brackets make for quick installation on the wall surface.

The Legacy Silhouette is also available in the streamlined Silhouette Pro version, for behind screen or in-wall applications. Please contact our friendly staff for further information

Specifications:

Application:

  • Low profile articulate full-range main or side on-wall

System Type:

  • 4 driver, 3 way

Tweeter:

  • 4″ AMT folded ribbon

Midwoofer:

  • 7″ Silver/Graphite woven diaphragm, cast basket, phase compensation plug

Bass:

  • 10″ long-throw low-profile motor

Passive Radiator:

  • 10″ mass loaded pneumatic

Low Freq. Alignment:

  • Assisted B6

Inputs:

  • 1 pair binding post, recessed cup

Recommended Amplification:

  • 25-300 Watts

Freq. Response (Hz):

  • 42-28k

Impedance:

  • 4 Ohm

Sensitivity:

  • 92 dB (2.83 Volts @1m)

Crossover (Hz):

  • 250, 2.5k

Dimensions (HxWxD, inches):

  • 36.5 x 16.5 x 5.125 each

Weight:

  • 54 lbs each

Colours Available:

Note: Prices and build times vary depending on the finish

 

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.