The Parasound NewClassic 2125 v.2 delivers 150 watts of Class AB power into 8 ohms, 225 watts into 4 ohms and can be bridged to mono to offer a massive 400 watts into a single channel. The 2125 v.2 is ideal for a quality two-channel hi-fi setup, to boost the output of your AV receiver or for use in a more serious dedicated cinema situation.
Parasound NewClassic 2125 V.2 Features and Specifications:
- THX Ultra2 certified
- 150 watts x 2 into 8 Ω (all channels driven)
- 225 watts x 2 into 4 Ω or 2 Ω (all channels driven)
- 400 watts x 1 bridged into 8 Ω or 4 Ω
- 35 amps peak current per channel
- 2 Ohm stable operation with load selector switch
- Two pairs of speaker outputs with front panel A/B buttons
- Rear-mounted lockout switch disables front A/B buttons
- High pass filter, switchable for 20Hz or 40Hz
- Automatic on/off by DC trigger with looping output
- Automatic on/off by audio signal with 2 sensitivity settings
- Fully discrete circuitry with a high current toroid transformer
- Bridging switch for stereo or mono operation
- Efficient, low heat design
- DC Servo and relay protection circuits
- Rear-mounted left and right gain controls
- Standby, channel status and high-temperature indicators
- Gold-plated RCA input jacks
- Heavy-duty 24k gold-plated 5-way speaker terminals
- 115/230v selector on the rear panel
- 2U rack mount kit available separately (Model RMK22)
Specifications:
- All Channels Driven
150 watts x 2, 8Ω
225 watts x 2, 4Ω
225 watts x 2, 2Ω (Load switch set to 2-3Ω) - Bridged Mono
400 watts x 1, 8Ω
400 watts x 1, 4Ω (Load switch set to 2-3Ω) - Current Capacity
35 amps peak per channel - Frequency Response
20 Hz – 50 kHz, +0/-3 dB, 1 watt
Dynamic Headroom – 1.3 dB - Total Harmonic Distortion
0.25% at full rated output
0.015% at average listening levels - IM Distortion – 0.05 %
Transient IM Distortion – Not measurable - S/N Ratio
114 dB at rated output, IHF A-weighted
106 dB at rated output, unweighted
93 dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted - Input Impedance – 33 k Ω
- Input Sensitivity
1 V in for 28.28 V out, THX standard - Inter-Channel Crosstalk
85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz
Damping Factor – Over 150 at 20Hz
12V Trigger Turn On – DC 9 – 12V, 15 mA - Audio Turn On
Quieter: 1 mV
Louder: 6 mV - AC Power Requirement
110 – 120 V / 220 -240 V, 50 – 60 Hz
0.5 watts standby
32 watts Idle (no audio)
550 watts full output - Dimensions
171/4″ Wide
16″ Deep, with cables connected
4.25″ High with feet, 3.5″ panel only (2U)
(437 x 406 x 107mm, 88.2 mm panel only) - Net Weight – 27 lbs (12.3 kg)
- Rack Mount Accessory
May be Purchased Separately: RMK22
Reviews
There are no reviews yet.