The Parasound JC1 plus monoblock amplifier delivers 400 watts of ultra-high bias class a/ab power to your 8ohm speaker. Class A power can be set to 25watts in high bias mode and 10 watts in low bias mode @8ohm.
Parasound JC1 Plus Key Features;
- Premier monaural amplifier
- Circuitry designed by legendary John Curl and CTC Builder
- Ultra-high bias Class A/AB operation
- Exclusive two position bias level adjustment
- Balanced inputs with discrete circuits and XLR connectors
- Vampire Direct gold-plated OFC RCA input
- Dual heavy-duty 24k gold-plated 5-way speaker binding posts
- Direct Coupled – no capacitors or inductors in the signal path
- Complementary MOSFET driver stage and JFET input stage
- 18 beta-matched 15 amp, 60 MHz bipolar output transistors
- 1.9 kVA encapsulated toroid power transformer
- Independent power supplies for input, driver and output stages
- 18,000 μF filters for the driver stage
- 132,000 µF Nichicon Gold Tune filters for the output stage
- DC Servo and relay protection circuits
- REL and Nichicon Muse capacitors
- Harris hyper-fast soft recovery diodes for all bridge rectifiers
- Auto turn-on by 12v trigger or audio signal trigger
- Ground lift switch, adjustable turn-on delay
- 4u Chassis with rear carry handles, rack mounting kit included
- Premium detachable AWG 12 power cord with silver solder
- THX Ultra2 certified
Available in Black & Silver
Sold as each!
Specifications:
Continuous power output, 20Hz – 20 kHz:
400 watts RMS x 1, 8 Ω
800 watts RMS x 1, 4 Ω
1200 watts RMS x 1, 2 Ω
Class A power output, 20Hz – 20 kHz:
25 watts, bias set to high, 8 Ω
10 watts, bias set to low, 8 Ω
Current capacity:
135 amperes peak
Power bandwidth:
2 Hz – 120 kHz, +0/-3 dB at 1 watt
Total harmonic distortion:
< 0.15 % at full power
IM distortion: balanced 16 V rms
< 0.03 %
Slew rate:
> 130 V/µsecond
Dynamic headroom:
> 1.8 dB
Input sensitivity:
1 V for 28.28 V, THX Reference Level
Input impedance:
100 k Ω
S/N ratio:
>120 dB, IHF A-weighted, bias set to high
>122 dB, IHF A-weighted, bias set to low
Damping factor:
> 1200 at 20 Hz
Power Requirement :
250 watts idle 1280 watts full power into 4 Ω
DC trigger output capacity :
+12 Vdc, 150 mA
Dimensions:
17-1/2″ w x 7-5/8″ h x 20″ d, 7″ h without feet
Net weight: 64 lb.
Reviews
There are no reviews yet.