The Esoteric N-05XD is a new frontier in network DAC/preamps. The N-05XD is a highly versatile high-end component that has been meticulously finished without any compromise, providing top-tier audio performance, no matter the function the user selects to use. When switched to fixed line level output, the N-05XD can be connected to an external preamp for operation as a standalone digital source or DAC. Likewise, its Network function can be completely turned OFF when not used. The N-05XD also comes equipped with AV Pass through output that allows it to be used as a front channel preamp in a surround sound AV speaker system
Esoteric N-05XD Features and Specifications:
– Master Sound Discrete DAC based on D1X Grandioso mono DAC circuit design
– Digital file support up to DSD512 (22.5Mhz) & 384kHz / 32-bit PCM
– Music server function (using external file storage)
– Full support for TIDAL, qobuz, Spotify, ROON Ready (RAAT enabled) & MQA decoding
– Fully balanced dual mono preamplifier
– Fully balanced dual mono headphone amplifier
– External clock sync
– ESOTERIC Sound Stream app (Android & iOS)
Specifications:
Digital audio inputs | |
XLR | 1 |
Input Level | 5.0Vp-p |
Input Impedance | 110Ω |
Input signal formats | |
Linear PCM | 32k to 192kHz, 16bit / 24bit (AES/EBU format) |
DSD | 2.8MHz (ES-LINK1, ES-LINK2, DoP format) |
RCA | 2 |
Input Level | 0.5Vp-p |
Input Impedance | 75Ω |
Input signal formats | |
Linear PCM | 32k to 192kHz, 16bit / 24bit (IEC60958 format) |
DSD | 2.8MHz (DoP format) |
Optical | 2 |
Input Level | –24.0 to –14.5dBm peak |
Input signal formats | |
Linear PCM | 32k to 192kHz, 16bit / 24bit (IEC60958 format) |
DSD | 2.8MHz (DoP format) |
USB | 1 (USB B connector) |
Input signal formats | |
Linear PCM | 44.1k to 384kHz, 16bit / 24bit / 32bit |
DSD | 2.8MHz, 5.6MHz, 11.2MHz, 22.5MHz |
ETHERNET | 1 (1000BASE-T) |
Input signal formats | |
Linear PCM | 44.1k to 384kHz, 16bit / 24bit / 32bit (stereo) • Only integer format file supported |
DSD | 2.8MHz, 5.6MHz, 11.2MHz, 22.5MHz (stereo) |
Supported file formats | |
PCM Lossless | FLAC, Apple Lossless (ALAC) , WAV, AIFF, MQA |
DSD Lossless | DSF, DSDIFF (DFF) , DoP |
Compressed audio | MP3, AAC (m4a container) |
USB DRIVE | 2 (Front, Rear) |
Supported file system | FAT32, exFAT, NTFS, Single partition, USB2.0 or later recommended |
Maximum power supply | 0.5A |
Input signal formats | |
Linear PCM | 44.1k to 384kHz, 16bit / 24bit / 32bit (stereo) • Only integer format file supported at 32bit |
DSD | 2.8MHz, 5.6MHz, 11.2MHz, 22.5MHz (stereo) |
Supported file formats | |
PCM Lossless | FLAC, Apple Lossless (ALAC) , WAV, AIFF, MQA |
DSD Lossless | DSF, DSDIFF (DFF) , DoP |
Compressed audio | MP3, AAC (m4a container) |
Analog audio inputs | |
XLR | 1 pair (L/R) |
Input Impedance | 50kΩ |
Maximum Input Voltage | 8Vrms |
RCA | 1 pair (L/R) |
Input Impedance | 25kΩ |
Maximum Input Voltage | 4Vrms |
Analog audio outputs | |
XLR/ESL-A | 1 pair (L/R) |
Output Impedance | 220Ω |
Maximum Output Level | 5.0Vrms (PCM Full-scale signal input, Analog output level setting: FIX) |
ESL-A PRE-OUT | 1 pair (L/R) |
RCA | 1 pair (L/R) |
Output Impedance | 60Ω |
Maximum Output Level | 2.5Vrms (PCM Full-scale signal input, Analog output level setting: FIX) |
Bluetooth® section | |
Version | 4.0 |
Supported profile | A2DP, AVRCP |
Supported A2DP codec | LDAC, LHDC, aptX™ HD audio, aptX™ audio, AAC, SBC |
Headphone out section | |
Balanced | 4-pin XLR × 1 |
Output Power | 1500mW + 1500mW (at 32Ω load) |
Compatible Impedance | 16 to 600Ω |
Unbalanced | ¼” (6.3mm) Standard Phone jack × 1 |
Output Power | 750mW + 750mW (at 32Ω load) |
Compatible Impedance | 16 to 600Ω |
Clock sync section | |
Clock Input | BNC × 1 |
Input frequency | 10MHz (±10ppm) |
Input impedance | 50Ω |
Input Level | |
Rectangular wave | TTL level or equivalent |
Sine wave | 0.5 to 1.0Vrms |
External control section | |
RS-232C | × 1 |
Trigger In | ⅛” (3.5mm) Monaural mini jack × 1 |
Input Level | |
Trigger Out | ⅛” (3.5mm) Monaural mini jack × 1 |
Output level | |
General | |
Power | |
AC 120V, 60Hz | |
AC 220 – 240V, 50Hz | |
Power consumption | 38W |
Overall dimensions (W×H×D) | 445 × 131 × 377mm / 17-⅝” × 5-¼” × 14-⅞” (including protrusions) |
Weight | 13.8kg / 30.5 lb. |
Included accessories | Power cord × 1 Remote control unit (RC-1334) × 1 AA batteries × 2 Felt mats × 3 Owner’s manual × 1 |