$30,379.00$39,000.00 inc. GST

KRIX MX-30 Speaker Package to buy in Castle Hill, NSW
Krix MX-30 Package
SKU: N/A Category: Brand:

The Krix MX-30 Package has been put together to provide you with an idea of what the speaker component of an MX-30 theatre will cost. We have included 5.2.2, 5.2.4, 7.2.2, 7.2.4, 7.2.6 and 9.2.6 speaker configurations to cover most room layouts and sizes.

Choosing the right Krix speaker package for your Room:

We would prefer to guide you through the process of choosing the right speakers for your room and budget to achieve maximum end results. We have listed the guide below to get you started

What we need from you

  • Room Dimensions
  • How many people do you wish to seat in the room
  • What is your expectation of the end result
  • What is your budget

With this information, we will guide you through the selection process which includes the key points below

  1. Choosing the correct MX system for your room
  2. Selecting the correct speaker configuration for your room
  3. Matching an AV receiver or pre/power combination to drive your Krix speaker system
  4. Guide you through your projection options including the correct screen size and type
  5. Discuss if you wish to DYI or use our in-house installation team to pre-wire and install your Krix cinema

Please visit our Castle Hill showroom or contact our friendly staff for more information!

The Krix MX-30 Package Includes;

The Krix MX-30 Package is an audio-only package please talk to our friendly staff about adding a projector screen etc.

  • Krix MX-30 speaker wall
  • Krix Phonix on-wall surround and rear surround speakers
  • Krix Phonix 45 on-ceiling Mounted Atmos speakers
  • Anthem MRX740 or MRX1140 AV receivers
  • Yamaha PX subwoofer amplifier
  • 152 meters of 14 gauge speaker cable.
  • Krix banana speaker cable terminations for amplifier
  • optional 200mm and 325mm spacers are available at an extra cost to fill larger screens
  • For larger rooms ask about Krix Hyperphonix 45 speakers for surrounds and heights

Note: 

Please contact a builder or handyman for advice and pricing for wall construction, we can supply a construction info sheet with requirements and dimensions.

Krix MX-30 Package Component Information:

Krix MX30 Information:

Designed for larger dedicated home cinemas with an acoustically transparent screen, the MX-30 will deliver your favourite movie soundtracks with supreme definition and accuracy, right through the picture and into your seat. Larger bass drivers and compression high-frequency drivers provide an extended frequency response at higher sound pressure levels.

  • Behind screen cinema quality speakers
  • Easy to install
  • Krix Infinite Baffle Wall

LCR SPEAKER MODULES

Frequency Range
38Hz-16kHz in-room response

Power Handling
100 – 700 Watts RMS recommended amplifier power

Sensitivity
98dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure Type
Bass reflex, front vented

Low-Frequency Driver
Single 380mm (15″) high stiffness paper cone driver with 75mm (3″) voice coil of optimal length for an increased linear excursion, wound on high temperature apical former and powerful vented magnet assembly designed for low distortion

High-Frequency Driver
A Krix patented designed 90º x 40º short throw horn with 25mm (1”) throat, 35mm (1.4”) compression driver, ferrite magnet, coated titanium diaphragm and polyimide surround

Input Terminals
Gold plated spring terminals

Dimensions
1220mm high x 450mm wide x 335mm deep (2865mm wide including subwoofer modules)

SUBWOOFER MODULES

Frequency Range
25Hz-200Hz in-room response

Power Handling
200 – 1400 Watts RMS recommended amplifier power

Sensitivity
100dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Enclosure Type
Bass reflex, front vented

Low-Frequency Driver
Single 455mm (18”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly

Input Terminals
High-level gold plated spring terminals

Dimensions
1220mm high x 750mm wide x 335mm deep (2865mm wide including LCR modules)

SYSTEM RECOMMENDATIONS

Recommended Room Depth
5m – 14m

Min. Screen Size 16:9
130″ (2880mm x 1620mm)

Minimum Screen Size 21:9
120″ (2806mm x 1184mm)


Krix Phonix Flat Information:

  • Immersive surround or ceiling effects
  • Easy wall mounting
  • Compact, slim design
 Frequency Range

45Hz-20kHz in-room response

Power Handling
50-150 Watts RMS recommended amplifier power

Sensitivity
88dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure Type
Bass reflex, front vented

Dimensions
388mm high x 260mm wide x 132mm deep

Low-Frequency Driver
Single 165mm (61/2”) paper cone driver. 33mm (11/4”) voice coil wound on high powered Kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High-Frequency Driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled

Crossover Point
1.8kHz

Input Terminals
Gold plated binding posts

Weight
6kg each

Sold as a pair


Krix Phonix 45 Information:

  • Immersive surround or ceiling effects
  • Easy wall mounting
  • Compact, slim design

Frequency Range
45Hz-20kHz in-room response

Power Handling
50-150 Watts RMS recommended amplifier power

Sensitivity
88dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure Type
Bass reflex, front vented

Dimensions
470mm high x 276mm wide x 124mm deep (please see technical drawing for dimensions when the speaker is rotated)

Low-Frequency Driver
Single 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high-powered aluminium former, with ventilated spider and aluminium flux stabilization ring for low distortion

High-Frequency Driver
26mm (1”) doped fabric dome with a large roll surround. Ferro fluid cooled

Crossover Point
1.8kHz

Input Terminals
High current terminals featuring 5mm hole to accept up to 10 AWG cable

Weight
6kg each

Sold as a pair


 

Speaker Configuration

KRIX MX30 5.2.2 Pack, KRIX MX30 5.2.4 Pack, KRIX MX30 7.2.2 Pack, KRIX MX30 7.2.4 Pack, KRIX MX30 7.2.6 Pack, KRIX MX30 9.2.6 Pack

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.