The Krix Phonix On Wall Speaker With easy wall mounting, the Phonix deliver surround effects with clarity and power, putting you in the middle of the action.
For an all-encompassing cinema sound in a conveniently sized package, the Phonix replicates the wedge-shaped design used in Krix’s commercial cinema surround speakers, allowing it to be mounted high and away from the listener, to maintain excellent pattern control and audio coverage to all listening positions.
Designed for on wall side and rear surround sound, the Phonix offers high power handling with low frequency extension down to 45Hz.
The hefty 165mm bass driver has a 33mm voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilisation ring for low distortion. The paper cone and surround of the bass driver have been developed to provide the smoothest possible response and a dynamic and non-fatiguing vocal mid-band.
The high frequency drive unit is a specially-damped, high power, 26mm doped fabric dome tweeter. Combined with the crossover network which has been designed and built using close-tolerance, professional-grade components, the resulting sound is exceptionally smooth and well controlled.
Complete with a braced, critically-damped enclosure, finished with a neat black cloth grille, the Phonix is a beautifully designed benchmark for surround loudspeaker reproduction.
For the ultimate cinema experience at home, play it through Krix.
Krix Phonix On Wall Key Features and Specs;
- 15 degree angled front baffle
- Easy wall mounting
- Compact design
Frequency range
45Hz-20kHz in room response
Power handling
50-150 Watts RMS recommended amplifier power
Sensitivity
88dB for 2.83 volts at 1 metre
Impedance
8 Ohms
Configuration
2-way
Enclosure type
Bass reflex, front vented
Dimensions
375mm high x 260mm wide x 205mm deep at the top (109mm deep at the bottom)
Low frequency driver
Single 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilisation ring for low distortion
High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled
Crossover point
1.8kHz
Input terminals
Gold plated binding posts
Weight
7kg each
Sold as a pair