RTI T2i / XP3 Kit
Offering many of the features of a high-end remote control, such as a color touchscreen, dual-RF capability, and fully programmable interface, the sophisticated device allows users to leverage advanced technologies at a budget-friendly price.
Setting a new standard for stylish innovation, the T2i, along with RTI’s newest lineup of remote controls, brings customers a thinner, sleeker, more ergonomically designed controller. The remote’s extensive list of innovative features includes an accelerometer for rapid “instant-on” control, a flush-mount 2.8-inch edge-to-edge LCD touchscreen, a cursor button for simple list navigation, and a backlit keypad for continued control within darker settings. For even further simplicity and convenience, the T2i provides 47 programmable keypad buttons including four buttons with removable keycaps that can be custom engraved using the RTI Laser Shark service.
For the ultimate in reliability, the T2i includes two built-in wireless modes. In addition to direct IR control with a wide IR transmitting frequency range, the remote features RTI’s revolutionary dual-RF platform — supporting both 433-MHz RF for one-way control and 2.4-GHz ZigBee® for bi-directional communication with RTI processors and supported third-party electronics such as music servers, lighting and HVAC systems, and many more. During downtime, the T2i handily slides into a minimalist docking station, which features a connector for an even more reliable charging process.
| Power | 3.6 VDC, 900 mAh Lithium-Ion Battery Pack |
| Power Management | Automatic On/Off (integrated accelerometer) |
| Infrared Control Range | 30 feet (9.1 meters) @ 60 degrees |
| Infrared Frequency Transmission Range | 15kHz – 460kHz |
| Radio Frequency Control Range | Up to 100 feet (30.5 meters) (with optional System Interfaces/Processors) |
| Radio Frequency Carrier | 802.15.4 @ 2.4GHz (Zigbee® Wireless Networking) and 433MHz |
| Operating Temperature | +32°F to +122°F (0°C to +50°C) |
| Operating Humidity | 5% to 95% Non-condensing |
| Touchscreen Display | High-brightness color TFT LCD 1/4 VGA (240×320 pixels) with 64K colors Integrated high-resolution touchscreen |
| Display Size | 2.8 in (71mm) diagonal |
| Backlights | Blue/White LED (Keypad) |
| Nominal Run Time on Full Charge | 4-6 hours, continuous use (WiFi® & backlight setting dependent) (5 to 7 days on average use) |
| Standby Time on Full Charge | 30 Days |
| Battery Charge Time | 3-4 Hours |
| Total System Memory | 32M Bytes Flash (non-volatile) memory |
| Device Capability | Total number of devices is limited only by memory |
| Macro Capability | Unlimited steps in a single macro Total number of macros is limited only by memory Macro capability on every button |
| Communications | USB 2.0 programming port |
| Dimensions (L x W x D) | 10.0″ (254mm) x 2.3″ (58mm) x 0.7″ (20mm) |
| Enclosure | High-impact molded ABS plastic |
| Weight | 8.8 oz. (250g) with battery pack |
| Warranty | One Year (Parts & Labor) / 90 days on the battery |
All specifications subject to change without notice
* Two-way feedback available only when used with RTI control components.
The XP-3 is a powerful remote control processor designed to automate and enhance the operation of electronics in smaller scale residential and commercial installations. With a robust 533MHz CPU and 128MB of nonvolatile flash memory, the
XP-3 improves the whole user experience, providing a much higher degree of control and automation than using a stand-alone remote control. The processor offers a remarkable value with an impressive feature set that is unmatched in its class – including a built-in astronomical clock for time-based events and support for ZigBee® wireless transmission bi-directional communications with compatible RTI remote controls. The XP-3 delivers rock-solid control and automation of today’s sophisticated electronic environments.
Boasting a powerful 533MHz CPU and 128MB of nonvolatile flash memory, this processor packs a big punch at a moderate price. With a built-in ZigBee® transceiver
and support for wireless bi-directional communications, the XP-3 can provide the user with rock-solid control and feedback from devices such as music servers, lighting, security, and much more. The XP-3 can also be configured to support one-way control via non-Ethernet enabled RTI in-wall products (Ex. RK1/RKM-1/RK2) and 433MHz remote controls.* For complete control in any room, the XP-3 even allows powerful two-way control with Ethernet enabled RTI in-wall controllers, and full support for the RTiPanel and Virtual Panel Apps.
The XP-3 control processor’s power really becomes evident when you see the list of features normally reserved for higher-priced processors, such as a built-in astronomical clock, Ethernet, and relay control and sensing. There are also two IR output ports with routing capability and a multi-purpose I/O port will accept an IR emitter or RTI accessory devices for voltage sensing or one-way RS-232.
* Integration Designer is only available to authorized RTI dealers.
* Integration Designer software only available to authorized RTI dealers.
| Power | +12VDC, 1A |
| Wireless Networking | IEEE802.15.4 Zigbee network compliant |
| RF Frequency Range | 2.4GHz – 2.5GHz |
| Multi-Purpose Output Ports | One custom 3.5mm 4-conductor jack (port 1) Designed for RTI modules as well as industry-standard IR emitters |
| IR Output Ports | Two, 3.5mm jack (ports 2 & 3) Compatible with industry-standard IR emitters |
| IR Output Drive | 100mA maximum (per port, adjustable) |
| Infrared Frequency Range | 15 KHz – 460 KHz |
| Infrared Input | Compatible with industry-standard repeaters and receivers |
| Relays | Two, 5 amps @ 30VDC |
| Sense Inputs | Two, 3-24VDC |
| RS232 Ports | One, Bi-directional RJ45 Connections |
| Ethernet Port | One, 10/100Base-T |
| USB Ports | One, Programming |
| Mounting | Wall-mount or free standing |
| Dimensions (W x H x D) | 7.0 in (175mm) x 3.0 in (76mm) x 1.0 in (25mm) |
| Weight | .4lbs (212g) |
| Warranty | One Year (Parts & Labor) |
